Governing Equations for Internal Turbulent Flow

From Thermal-FluidsPedia

(Difference between revisions)
Jump to: navigation, search
(Created page with 'The generalized governing equations for three-dimensional turbulent flow have been presented in Chapter 2 (see Section 2.5). For two-dimensional steady-state turbulent flow insid…')
Line 1: Line 1:
-
The generalized governing equations for three-dimensional turbulent flow have been presented in Chapter 2 (see Section 2.5). For two-dimensional steady-state turbulent flow inside a cylindrical coordinate system (see Fig. 5.2), the governing equations are:
+
The generalized governing equations for three-dimensional turbulent flow have been presented in [[Fundamentals of turbulence]]. For two-dimensional steady-state turbulent flow inside a cylindrical coordinate system (see [https://www.thermalfluidscentral.org/e-encyclopedia/index.php/File:Fig5.2.png| this figure]), the governing equations are:
 
 
{| class="wikitable" border="0"
{| class="wikitable" border="0"
Line 14: Line 14:
<math>\bar{u}\frac{\partial \bar{u}}{\partial x}+\bar{v}\frac{\partial \bar{u}}{\partial r}=-\frac{1}{\rho }\frac{d\bar{p}}{dx}+\frac{1}{r}\frac{\partial }{\partial r}\left[ r(\nu +{{\varepsilon }_{M}})\frac{\partial \bar{u}}{\partial r} \right]</math>
<math>\bar{u}\frac{\partial \bar{u}}{\partial x}+\bar{v}\frac{\partial \bar{u}}{\partial r}=-\frac{1}{\rho }\frac{d\bar{p}}{dx}+\frac{1}{r}\frac{\partial }{\partial r}\left[ r(\nu +{{\varepsilon }_{M}})\frac{\partial \bar{u}}{\partial r} \right]</math>
</center>
</center>
-
|{{EquationRef|(1)}}
+
|{{EquationRef|(2)}}
|}
|}
Line 22: Line 22:
<math>\bar{u}\frac{\partial \bar{T}}{\partial x}+\bar{v}\frac{\partial \bar{T}}{\partial r}=\frac{1}{r}\frac{\partial }{\partial r}\left[ r(\alpha +{{\varepsilon }_{H}})\frac{\partial \bar{T}}{\partial r} \right]</math>
<math>\bar{u}\frac{\partial \bar{T}}{\partial x}+\bar{v}\frac{\partial \bar{T}}{\partial r}=\frac{1}{r}\frac{\partial }{\partial r}\left[ r(\alpha +{{\varepsilon }_{H}})\frac{\partial \bar{T}}{\partial r} \right]</math>
</center>
</center>
-
|{{EquationRef|(1)}}
+
|{{EquationRef|(3)}}
|}
|}
-
which can be obtained by using the boundary layer theory similar to Chapter 4. The second order derivatives of <math>\bar{u}\text{ and }\bar{T}</math>in the x-direction have been dropped based on the similar arguments for laminar flow in a duct. The time-averaged pressure is not a function of r, but is a function of x only. It can also be observed from eqs. (5.267) and (5.268) that the both momentum and energy diffusions are governed by molecular and eddy diffusions. Similar to the cases of external turbulent boundary layers, the momentum and thermal eddy diffusivities, <math>{{\varepsilon }_{M}}\text{ and }{{\varepsilon }_{H}}</math>, are defined as:
+
which can be obtained by using the [[boundary layer theory]]. The second order derivatives of <math>\bar{u}\text{ and }\bar{T}</math>in the ''x''-direction have been dropped based on the similar arguments for laminar flow in a duct. The time-averaged pressure is not a function of ''r'', but is a function of ''x'' only. It can also be observed from eqs. (2) and (3) that the both momentum and energy diffusions are governed by molecular and eddy diffusions. Similar to the cases of external turbulent boundary layers, the momentum and thermal eddy diffusivities, <math>{{\varepsilon }_{M}}\text{ and }{{\varepsilon }_{H}}</math>, are defined as:
{| class="wikitable" border="0"
{| class="wikitable" border="0"
Line 31: Line 31:
<math>-\overline{\rho {u}'{v}'}=\rho {{\varepsilon }_{M}}\frac{\partial \bar{u}}{\partial r}</math>
<math>-\overline{\rho {u}'{v}'}=\rho {{\varepsilon }_{M}}\frac{\partial \bar{u}}{\partial r}</math>
</center>
</center>
-
|{{EquationRef|(1)}}
+
|{{EquationRef|(4)}}
|}
|}
Line 39: Line 39:
<math>-\rho {{c}_{p}}\overline{{v}'{T}'}=\rho {{c}_{p}}{{\varepsilon }_{H}}\frac{\partial \bar{T}}{\partial r}</math>
<math>-\rho {{c}_{p}}\overline{{v}'{T}'}=\rho {{c}_{p}}{{\varepsilon }_{H}}\frac{\partial \bar{T}}{\partial r}</math>
</center>
</center>
-
|{{EquationRef|(1)}}
+
|{{EquationRef|(5)}}
|}
|}
where <math>{u}'\text{, }{v}'\text{ and }{T}'</math> are the fluctuations of axial velocity, radial velocity, and temperature, respectively. Appropriate turbulent models in either algebraic or differential equation forms must be employed to obtain the eddy diffusivities.
where <math>{u}'\text{, }{v}'\text{ and }{T}'</math> are the fluctuations of axial velocity, radial velocity, and temperature, respectively. Appropriate turbulent models in either algebraic or differential equation forms must be employed to obtain the eddy diffusivities.

Revision as of 07:06, 23 July 2010

The generalized governing equations for three-dimensional turbulent flow have been presented in Fundamentals of turbulence. For two-dimensional steady-state turbulent flow inside a cylindrical coordinate system (see this figure), the governing equations are:

\frac{\partial \bar{u}}{\partial x}+\frac{1}{r}\frac{\partial (r\bar{v})}{\partial r}=0

(1)

\bar{u}\frac{\partial \bar{u}}{\partial x}+\bar{v}\frac{\partial \bar{u}}{\partial r}=-\frac{1}{\rho }\frac{d\bar{p}}{dx}+\frac{1}{r}\frac{\partial }{\partial r}\left[ r(\nu +{{\varepsilon }_{M}})\frac{\partial \bar{u}}{\partial r} \right]

(2)

\bar{u}\frac{\partial \bar{T}}{\partial x}+\bar{v}\frac{\partial \bar{T}}{\partial r}=\frac{1}{r}\frac{\partial }{\partial r}\left[ r(\alpha +{{\varepsilon }_{H}})\frac{\partial \bar{T}}{\partial r} \right]

(3)

which can be obtained by using the boundary layer theory. The second order derivatives of \bar{u}\text{ and }\bar{T}in the x-direction have been dropped based on the similar arguments for laminar flow in a duct. The time-averaged pressure is not a function of r, but is a function of x only. It can also be observed from eqs. (2) and (3) that the both momentum and energy diffusions are governed by molecular and eddy diffusions. Similar to the cases of external turbulent boundary layers, the momentum and thermal eddy diffusivities, {{\varepsilon }_{M}}\text{ and }{{\varepsilon }_{H}}, are defined as:

-\overline{\rho {u}'{v}'}=\rho {{\varepsilon }_{M}}\frac{\partial \bar{u}}{\partial r}

(4)

-\rho {{c}_{p}}\overline{{v}'{T}'}=\rho {{c}_{p}}{{\varepsilon }_{H}}\frac{\partial \bar{T}}{\partial r}

(5)

where u', v' and T' are the fluctuations of axial velocity, radial velocity, and temperature, respectively. Appropriate turbulent models in either algebraic or differential equation forms must be employed to obtain the eddy diffusivities.