# Film Boiling Analysis in Porous Media

### From Thermal-FluidsPedia

Line 6: | Line 6: | ||

<center><math>\frac{{\partial {u_v}}}{{\partial x}} + \frac{{\partial {v_v}}}{{\partial y}} = 0\qquad \qquad(1) </math></center> | <center><math>\frac{{\partial {u_v}}}{{\partial x}} + \frac{{\partial {v_v}}}{{\partial y}} = 0\qquad \qquad(1) </math></center> | ||

- | + | ||

<center><math>{u_v} = - \frac{K}{{{\mu _v}}}({\rho _\ell } - {\rho _v})g\qquad \qquad(2) </math></center> | <center><math>{u_v} = - \frac{K}{{{\mu _v}}}({\rho _\ell } - {\rho _v})g\qquad \qquad(2) </math></center> | ||

- | + | ||

<center><math>{u_v}\frac{{\partial {T_v}}}{{\partial x}} + {v_v}\frac{{\partial {T_v}}}{{\partial y}} = {\alpha _{mv}}\frac{{{\partial ^2}{T_v}}}{{\partial {y^2}}}\qquad \qquad(3) </math></center> | <center><math>{u_v}\frac{{\partial {T_v}}}{{\partial x}} + {v_v}\frac{{\partial {T_v}}}{{\partial y}} = {\alpha _{mv}}\frac{{{\partial ^2}{T_v}}}{{\partial {y^2}}}\qquad \qquad(3) </math></center> | ||

- | + | ||

where <math>{\alpha _{mv}}</math> is thermal diffusivity of the porous medium saturated with the vapor. | where <math>{\alpha _{mv}}</math> is thermal diffusivity of the porous medium saturated with the vapor. | ||

Line 18: | Line 18: | ||

<center><math>\frac{{\partial {u_\ell }}}{{\partial x}} + \frac{{\partial {v_\ell }}}{{\partial y}} = 0\qquad \qquad(4) </math></center> | <center><math>\frac{{\partial {u_\ell }}}{{\partial x}} + \frac{{\partial {v_\ell }}}{{\partial y}} = 0\qquad \qquad(4) </math></center> | ||

- | + | ||

<center><math>{u_\ell } = \frac{K}{{{\mu _\ell }}}{\rho _\infty }g{\beta _\ell }({T_\ell } - {T_\infty })\qquad \qquad(5) </math></center> | <center><math>{u_\ell } = \frac{K}{{{\mu _\ell }}}{\rho _\infty }g{\beta _\ell }({T_\ell } - {T_\infty })\qquad \qquad(5) </math></center> | ||

- | + | ||

<center><math>{u_\ell }\frac{{\partial {T_\ell }}}{{\partial x}} + {v_\ell }\frac{{\partial {T_\ell }}}{{\partial y}} = {\alpha _{m\ell }}\frac{{{\partial ^2}{T_\ell }}}{{\partial {y^2}}}\qquad \qquad(6) </math></center> | <center><math>{u_\ell }\frac{{\partial {T_\ell }}}{{\partial x}} + {v_\ell }\frac{{\partial {T_\ell }}}{{\partial y}} = {\alpha _{m\ell }}\frac{{{\partial ^2}{T_\ell }}}{{\partial {y^2}}}\qquad \qquad(6) </math></center> | ||

- | + | ||

where <math>{\alpha _{m\ell }}</math> is thermal diffusivity of the porous medium saturated with the liquid. | where <math>{\alpha _{m\ell }}</math> is thermal diffusivity of the porous medium saturated with the liquid. | ||

Line 33: | Line 33: | ||

, & {y = 0} \\ | , & {y = 0} \\ | ||

\end{array}\qquad \qquad(7) </math></center> | \end{array}\qquad \qquad(7) </math></center> | ||

- | + | ||

<center><math>T = {T_w}\begin{array}{*{20}{c}} | <center><math>T = {T_w}\begin{array}{*{20}{c}} | ||

, & {y = 0} \\ | , & {y = 0} \\ | ||

\end{array}\qquad \qquad(8) </math></center> | \end{array}\qquad \qquad(8) </math></center> | ||

- | + | ||

It should be pointed out that <math>{u_v}</math> is not equal to zero at the heating surface under Darcy’s law, i.e., slip occurs at the surface. The boundary condition in the liquid that is far from the heated surface is | It should be pointed out that <math>{u_v}</math> is not equal to zero at the heating surface under Darcy’s law, i.e., slip occurs at the surface. The boundary condition in the liquid that is far from the heated surface is | ||

Line 45: | Line 45: | ||

, & {y \to \infty } \\ | , & {y \to \infty } \\ | ||

\end{array}\qquad \qquad(9) </math></center> | \end{array}\qquad \qquad(9) </math></center> | ||

- | + | ||

<center><math>{T_\ell } = {T_\infty }\begin{array}{*{20}{c}} | <center><math>{T_\ell } = {T_\infty }\begin{array}{*{20}{c}} | ||

, & {y \to \infty } \\ | , & {y \to \infty } \\ | ||

\end{array}\qquad \qquad(10) </math></center> | \end{array}\qquad \qquad(10) </math></center> | ||

- | + | ||

The mass balance at the liquid-vapor interface is [see eq. (10.152)]: | The mass balance at the liquid-vapor interface is [see eq. (10.152)]: | ||

Line 57: | Line 57: | ||

, & {y = {\delta _v}} \\ | , & {y = {\delta _v}} \\ | ||

\end{array}\qquad \qquad(11) </math></center> | \end{array}\qquad \qquad(11) </math></center> | ||

- | + | ||

The temperature at the liquid-vapor interface is equal to the saturation temperature: | The temperature at the liquid-vapor interface is equal to the saturation temperature: | ||

Line 63: | Line 63: | ||

, & {y = \delta } \\ | , & {y = \delta } \\ | ||

\end{array}_v}\qquad \qquad(12) </math></center> | \end{array}_v}\qquad \qquad(12) </math></center> | ||

- | + | ||

The above film boiling problem can be solved using a similarity solution like that for film condensation in porous media discussed in Section 8.5.2. The results | The above film boiling problem can be solved using a similarity solution like that for film condensation in porous media discussed in Section 8.5.2. The results | ||

Line 80: | Line 80: | ||

{\rm{J}}{{\rm{a}}_\ell } = \frac{{{c_{pv}}({T_w} - {T_{sat}})}}{{{h_{\ell v}}}} \\ | {\rm{J}}{{\rm{a}}_\ell } = \frac{{{c_{pv}}({T_w} - {T_{sat}})}}{{{h_{\ell v}}}} \\ | ||

\end{array}\qquad \qquad(13) </math></center> | \end{array}\qquad \qquad(13) </math></center> | ||

- | + | ||

where Jakob numbers <math>{\rm{J}}{{\rm{a}}_v}</math> and <math>{\rm{J}}{{\rm{a}}_\ell }</math>, measure the degrees of superheat in the vapor and subcooling in the liquid. For all cases shown in Fig. 2, the effect of liquid subcooling on the heat transfer is insignificant. The effect of vapor superheat on heat transfer is significant when <math>{\rm{J}}{{\rm{a}}_v}</math> is less than 2. The following asymptotic result can be obtained from Fig. 2: | where Jakob numbers <math>{\rm{J}}{{\rm{a}}_v}</math> and <math>{\rm{J}}{{\rm{a}}_\ell }</math>, measure the degrees of superheat in the vapor and subcooling in the liquid. For all cases shown in Fig. 2, the effect of liquid subcooling on the heat transfer is insignificant. The effect of vapor superheat on heat transfer is significant when <math>{\rm{J}}{{\rm{a}}_v}</math> is less than 2. The following asymptotic result can be obtained from Fig. 2: | ||

Line 87: | Line 87: | ||

, & {{\rm{Ja}}} \\ | , & {{\rm{Ja}}} \\ | ||

\end{array}_v} \to \infty \qquad \qquad(14) </math></center> | \end{array}_v} \to \infty \qquad \qquad(14) </math></center> | ||

- | + | ||

==References== | ==References== |

## Revision as of 14:57, 1 June 2010

Film boiling of liquid saturated in a porous medium at an initial temperature of next to a vertical, impermeable heated wall at a temperature of

*T*_{w} > *T*_{sat} is analyzed (see Fig. 1; Cheng and Verma, 1981; Nield and Bejan, 1999). Vapor generated at the liquid-vapor interface flows upward due to buoyancy force. The liquid adjacent to the vapor layer is dragged upward by the vapor. The temperature at the liquid-vapor interface is at the saturation temperature. There are velocity and thermal boundary layers in the liquid phase adjacent to the vapor film. The solution of the film boiling problem requires solutions of vapor and liquid flow, as well as heat transfer in both the vapor and liquid phases. It is assumed that boundary layer approximations are applicable to the vapor film and to convection heat transfer in the liquid phase. It is further assumed that the vapor flow is laminar, two-dimensional; Darcy’s law is applicable in both the vapor and liquid phases. The continuity, momentum, and energy equations in the vapor film are

where α_{mv} is thermal diffusivity of the porous medium saturated with the vapor.
The governing equations for the liquid boundary layer are

where is thermal diffusivity of the porous medium saturated with the liquid.

The boundary conditions at the heated wall (*y* = 0) are

It should be pointed out that *u*_{v} is not equal to zero at the heating surface under Darcy’s law, i.e., slip occurs at the surface. The boundary condition in the liquid that is far from the heated surface is

The mass balance at the liquid-vapor interface is [see eq. (10.152)]:

The temperature at the liquid-vapor interface is equal to the saturation temperature:

The above film boiling problem can be solved using a similarity solution like that for film condensation in porous media discussed in Section 8.5.2. The results

obtained by Cheng and Verma (1981) are shown in Fig. 2. The dimensionless parameters used in Fig. 2 are defined as

where Jakob numbers Ja_{v} and , measure the degrees of superheat in the vapor and subcooling in the liquid. For all cases shown in Fig. 2, the effect of liquid subcooling on the heat transfer is insignificant. The effect of vapor superheat on heat transfer is significant when Ja_{v} is less than 2. The following asymptotic result can be obtained from Fig. 2:

## References

Cheng, P., and Verma, A.K., 1981, “The Effect of Subcooling Liquid on Film Boiling about a Vertical Heated Surface in a Porous Medium,” *International Journal of Heat and Mass Transfer*, Vol. 24, pp. 1151-1160.

Nield, D.A., and Bejan, A., 1999, *Convection in Porous Media*, 2^{nd} ed., Springer-Verlag, New York.